Key takeaways
- Compare the best thermal paste options for CPUs and GPUs, from budget carbon pastes to premium liquid metal, with key specs, types, and buying tips.
If you want one tube that suits almost any build, the ARCTIC MX-4 is the safest all-round choice: it is carbon-based, completely non-conductive, easy to spread, and rated for years of service. Builders chasing the lowest possible temperatures from a conventional paste should look at Thermal Grizzly Kryonaut, while experienced users with nickel-plated coolers can step up to Thermal Grizzly Conductonaut liquid metal for the highest manufacturer-rated conductivity in this roundup. The Noctua NT-H2 and Arctic Silver 5 round out the list as proven mid-range options with long track records.
As an Amazon Associate, we earn from qualifying purchases.
Thermal paste, also called thermal compound or thermal interface material, fills the microscopic air gaps between a processor and its cooler. Air is a poor heat conductor, so even a thin layer of the right compound can make a measurable difference to operating temperatures, fan noise, and sustained boost behavior. This guide compares five well-documented compounds across the budget, mid-range, and premium tiers, using only manufacturer-published specifications, and explains how the main compound types differ so you can match a paste to your hardware and your comfort level.
Table of Contents
- ARCTIC MX-4
- Noctua NT-H2
- Arctic Silver 5
- Thermal Grizzly Kryonaut
- Thermal Grizzly Conductonaut
- How to Choose the Right Thermal Paste
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
ARCTIC MX-4
Tier: Budget
The ARCTIC MX-4 is a carbon-based compound built around carbon microparticles, and it has become a default recommendation for everyday builds because it removes nearly every risk associated with applying paste. It contains no metal and is not electrically conductive, so an accidental smear on the motherboard is far less dangerous than with metal-filled or liquid metal compounds. ARCTIC also states that the formula does not dry out or degrade the way metal and silicone compounds can, and rates it to last at least eight years once applied.
The consistency is thin enough to spread easily with the included spatula, which suits first-time builders, and the 4 g tube covers multiple installations across CPUs, GPUs, and consoles. ARCTIC does not headline a conductivity figure for the MX-4 in its technical data, instead publishing density, viscosity, and resistivity figures, so it is best viewed as a balanced, safety-first compound rather than a record-chasing one. For stock and mildly overclocked systems, it remains the low-hassle pick of this roundup.
Specs:
- Compound type: Carbon microparticle paste
- Tube size: 4 g, spatula included
- Density: 2.50 g/cm³
- Viscosity: 31,600 Poise
- Volume resistivity: 3.8 × 10¹³ Ω-cm
- Continuous use temperature: -50 to 150 °C
- Electrically conductive: No, metal-free formula
- Model number: ACTCP00031B
Noctua NT-H2
Tier: Mid-range
The Noctua NT-H2 is the second generation of Noctua’s hybrid thermal compound, using a fine-tuned mixture of metal oxide micro-particles designed to lower thermal resistance and allow a thinner bond line at typical mounting pressures. It is aimed at enthusiast air and water cooling on CPUs and GPUs, and it works with coolers made from copper or aluminum, plated or not, because the formula is neither electrically conductive nor corroding.
Application is deliberately simple: Noctua states there is no need to spread the paste manually before mounting the heatsink, and the 3.5 g pack includes three NA-CW1 cleaning wipes pre-moistened with an isopropyl alcohol mixture for removing old compound. The same pack covers roughly three to twenty applications depending on die size. Noctua rates the storage life at up to three years and the recommended usage time on a CPU at up to five years, which makes the NT-H2 a sensible fit-and-forget option for systems that are rarely opened.
Specs:
- Compound type: Hybrid compound with metal oxide micro-particles
- Tube size: 3.5 g (1.2 ml)
- Density: 2.81 g/cm³
- Operating temperature: -50 to 200 °C
- Electrically conductive: No, and non-corroding
- Included accessories: 3 NA-CW1 cleaning wipes
- Recommended usage time: Up to 5 years on the CPU
- Model number: NT-H2 3.5g
Arctic Silver 5
Tier: Mid-range
Arctic Silver 5 is one of the longest-running names in thermal compounds. It is a high-density polysynthetic compound that uses 99.9 percent pure micronized silver in three distinct particle shapes and sizes, blended with thermally conductive ceramic particles such as zinc oxide, aluminum oxide, and boron nitride. Over 88 percent of the compound by weight is thermally conductive filler, which is unusually high for a paste in this tier.
Two characteristics define Arctic Silver 5 in practice. First, it is not electrically conductive, but the manufacturer notes it is slightly capacitive, so it should still be kept off pins and traces. Second, it has a genuine break-in period: Arctic Silver states the compound can take up to 200 hours and several thermal cycles to reach maximum conductivity as the particles settle. Builders who want full performance immediately after mounting may prefer a no-cure compound, but for a set-and-forget desktop that runs daily, the curing behavior is a reasonable trade for its long service history.
Specs:
- Compound type: Polysynthetic silver with ceramic particles
- Filler content: Over 88 percent thermally conductive filler by weight
- Average particle size: Under 0.49 micron
- Thermal conductance: Over 350,000 W/m² °C at a 0.001-inch layer (manufacturer figure)
- Temperature limits: Peak -50 °C to over 180 °C; long-term -50 °C to 130 °C
- Break-in period: Up to 200 hours with thermal cycling
- Electrically conductive: No, but slightly capacitive
- Tube size: 3.5 g syringe
Thermal Grizzly Kryonaut
Tier: Premium
Thermal Grizzly Kryonaut was developed for the overclocking community and sits at the top of the conventional paste category. Its structure combines nano-aluminum and zinc oxide particles, and the published thermal conductivity of 12.5 W/mK is among the highest figures quoted for a non-conductive paste. Thermal Grizzly states the compound does not dry out even at 80 °C and requires no curing, so it delivers its rated performance as soon as the cooler is mounted.
Despite the performance focus, Kryonaut carries an electrical conductivity of 0 pS/m, meaning it is electrically insulating and far more forgiving around sockets and surface-mounted components than liquid metal. The rated temperature range extends from -250 °C to 350 °C, which is why it is also specified for sub-ambient and liquid nitrogen cooling. The trade-off is quantity: the 1 g syringe is sized for a small number of applications, and larger 5.55 g and 11.1 g versions exist for frequent builders. For a high-end CPU under a strong air cooler or custom loop, Kryonaut is the premium conventional pick.
Specs:
- Compound type: Nano-aluminum and zinc oxide particle paste
- Thermal conductivity: 12.5 W/mK
- Thermal resistance: 0.0032 K/W
- Electrical conductivity: 0 pS/m (electrically insulating)
- Viscosity: 120 to 170 Pa·s
- Density: 3.7 g/cm³
- Temperature range: -250 °C to 350 °C
- Curing: None required
- Tube size: 1 g syringe with spatula, model TG-K-001-R
Thermal Grizzly Conductonaut
Tier: Premium (liquid metal, experienced users only)
Conductonaut is not a paste in the traditional sense. It is a liquid metal compound based on a eutectic alloy of tin, gallium, and indium, and its published thermal conductivity of 73 W/mK is several times higher than any conventional compound in this roundup. That performance ceiling is why it is used between bare dies and cold plates, and in high-end desktop builds where every degree matters.
The cautions are equally clear in the manufacturer’s documentation. Conductonaut is electrically conductive, so any spill onto motherboard traces or socket pins can cause a short circuit. It must never be used with aluminum heatsinks, because the gallium alloy attacks aluminum, and Thermal Grizzly recommends nickel-plated surfaces for the best long-term stability. Application uses the included applicators to spread a very thin film, and the 1 g syringe is rated by the manufacturer as enough for many applications because so little is used each time. This is a specialist product: the gains are real on paper, but it belongs only in builds where the cooler materials are confirmed compatible and the installer is comfortable working with a conductive liquid.
Specs:
- Compound type: Liquid metal, eutectic alloy of tin, gallium, and indium
- Thermal conductivity: 73 W/mK
- Temperature range: 10 °C to 140 °C
- Tube size: 1 g syringe
- Included accessories: 3 applicators and pads
- Electrically conductive: Yes
- Cooler compatibility: Nickel-plated surfaces recommended; never use with aluminum heatsinks
How to Choose the Right Thermal Paste
Compound type
Carbon-based pastes such as the MX-4 prioritize safety and longevity, and they suit the majority of builds. Metal oxide and ceramic hybrids, including the NT-H2 and Kryonaut, raise thermal performance while staying electrically insulating. Silver-filled compounds like Arctic Silver 5 sit in the same safe category but add a break-in period. Liquid metal stands apart: it offers the highest rated conductivity, but it is conductive, corrosive to aluminum, and demands compatible cooler materials and careful application.
Conductivity ratings
Manufacturers measure and report thermal conductivity differently, and there is no single enforced standard across brands, so a higher W/mK figure on the box does not guarantee a proportionally cooler processor. Treat the rating as a rough guide to a compound’s class rather than a precise prediction, and weigh viscosity, mounting pressure, and cooler quality alongside it. In practice, the gap between good conventional pastes on a modern CPU is usually small, while the jump to liquid metal is larger but comes with the risks described above.
Electrical safety and cooler materials
For a first build or a system you cannot afford to damage, choose a non-conductive compound. Any of the four conventional pastes here qualifies. Reserve liquid metal for confirmed nickel-plated copper cold plates, keep it away from aluminum entirely, and consider protecting surrounding components before application.
Viscosity and application style
Thinner compounds spread easily and suit beginners, while thicker, high-viscosity pastes can resist pump-out on bare GPU dies over repeated heat cycles. Syringe size matters too: a 1 g tube is enough for a couple of CPU installs, while 3.5 g and 4 g tubes cover years of maintenance for most users.
Frequently Asked Questions
How often should thermal paste be replaced?
Replacement is only necessary when the cooler is removed, when temperatures climb noticeably, or when a compound reaches the end of its rated service life. Long-life compounds in this roundup are rated for five years or more in place, so a system that has not been opened and still runs at normal temperatures does not need fresh paste on a fixed schedule.
Is liquid metal thermal compound safe to use?
Liquid metal is safe only under specific conditions: a nickel-plated or copper cold plate, no aluminum anywhere in the contact path, and careful application that keeps the conductive liquid off surrounding electronics. Thermal Grizzly explicitly warns against aluminum heatsinks and recommends nickel-plated surfaces. Builders who are unsure about their cooler materials should choose a non-conductive paste instead.
Does a higher thermal conductivity rating always mean lower temperatures?
No. Ratings are produced under each manufacturer’s own test conditions, and real results depend on bond-line thickness, mounting pressure, cooler design, and the heat load of the chip. A higher-rated compound has more headroom, but on many mainstream CPUs the measured difference between quality conventional pastes is small, while liquid metal shows its advantage mainly on high-power or bare-die applications.
How much thermal paste should be applied to a CPU?
A small amount is enough, because the cooler’s mounting pressure spreads the compound into a thin layer that only needs to fill microscopic surface gaps. A pea-sized dot in the center of the heat spreader is the most common guidance for mainstream desktop sockets, with larger heat spreaders sometimes calling for a thin line or several small dots. Excess paste does not improve cooling and only makes cleanup harder.
Conclusion
For most builders, the ARCTIC MX-4 covers every requirement at the budget tier: safe, durable, and simple to apply. The Noctua NT-H2 adds bundled cleaning wipes and a five-year service rating for the mid-range, while Arctic Silver 5 remains a proven silver-based option for those willing to accept its break-in period. Kryonaut is the premium conventional choice for overclocked systems, and Conductonaut is the specialist liquid metal for experienced users with compatible hardware. Match the compound to your cooler materials and your confidence level, and any of these five will serve a build well.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!