Key takeaways
- HDMI vs DisplayPort compared on bandwidth, refresh rates, HDR, audio and daisy-chaining, with five certified cable picks for gaming and desk PC setups.
Table of Contents
- The short answer
- HDMI explained: the universal connector
- DisplayPort explained: the PC-first connector
- Head-to-head: the differences that matter
- The five products compared
- How to choose between HDMI and DisplayPort
- Who should skip a new cable
- FAQ
- Conclusion
Introduction
Every graphics card and gaming monitor sold today offers some mix of HDMI and DisplayPort outputs, and the two connectors are not interchangeable in what they can carry. Pick the wrong one and a 4K 144Hz monitor may quietly cap itself at 60Hz, variable refresh may disappear, or a second display may refuse to join the chain. Pick the right one and the same hardware runs at its full rated speed with no adapters and no guesswork.
This guide compares HDMI 2.1 against DisplayPort 1.4 and DisplayPort 2.1 on the things that actually decide a purchase: raw bandwidth, the resolutions and refresh rates each one unlocks, HDR and adaptive-sync support, audio handling, daisy-chaining and cable length. It then recommends five certified cables, split across both standards, so you can match the pick to the ports on your own desk.
As an Amazon Associate, we earn from qualifying purchases.
The short answer
For a desktop PC driving a gaming monitor, DisplayPort is usually the better default. It was designed for computers, it carries high refresh rates at 1440p and 4K without compression on mainstream hardware, it supports daisy-chaining through Multi-Stream Transport, and its top tier, DisplayPort 2.1 UHBR20, delivers 80Gbps of bandwidth, well beyond anything HDMI currently ships in consumer gear. For a PC that also feeds a TV, a soundbar or a console, HDMI 2.1 is the connector that ties the room together, with 48Gbps of bandwidth, eARC audio return and near-universal support on televisions. Many setups end up using both: DisplayPort for the monitor, HDMI for the TV.
HDMI explained: the universal connector
HDMI is the connector the living room standardized on, and current PCs inherit that ecosystem. The version that matters now is HDMI 2.1. A certified Ultra High Speed HDMI cable carries 48Gbps using Fixed Rate Link signaling, enough for 4K at 120Hz uncompressed and 8K at 60Hz with Display Stream Compression. HDMI 2.1 also formalized the features gamers used to associate with DisplayPort: Variable Refresh Rate, Auto Low Latency Mode, Quick Frame Transport and Quick Media Switching all live in the specification, alongside Dynamic HDR and support for HDCP 2.3.
HDMI’s second advantage is audio and control. The same cable that carries the picture can carry uncompressed multichannel audio, and the eARC channel lets a TV send full-quality sound back to a soundbar or receiver. Consumer Electronics Control lets one remote wake and steer the whole chain. Every modern TV, console and capture device speaks HDMI, so for anything that is not a dedicated computer monitor, HDMI is rarely the wrong answer. Its limits show up at the extremes: there is no daisy-chaining, passive copper runs get unreliable sooner at full 48Gbps speed, and monitors with HDMI 2.1 ports still trail DisplayPort models in number.
DisplayPort explained: the PC-first connector
DisplayPort was built by VESA specifically for connecting computers to displays, and its priorities show. DisplayPort 1.4, still the most common version on graphics cards and monitors, uses HBR3 signaling for 32.4Gbps of raw bandwidth. That covers 4K at 120Hz and, with Display Stream Compression, modes up to 8K at 60Hz and 4K at 240Hz. Adaptive Sync, the technology behind AMD FreeSync and the original NVIDIA G-Sync modules, is a native part of the standard rather than an add-on.
DisplayPort 2.1 moves to UHBR signaling, with UHBR20 cables rated at 80Gbps. That headroom allows uncompressed 4K at 240Hz and 8K at 60Hz, and much higher modes with compression. Two structural features have no HDMI equivalent. Multi-Stream Transport lets one port drive several monitors in a daisy chain or through a hub, which keeps multi-monitor desks tidy. And because DisplayPort Alt Mode rides over USB-C, the same standard feeds monitors from thin laptops and Thunderbolt docks. The trade-offs are practical rather than technical: televisions almost never include DisplayPort, consoles ignore it entirely, and longer passive runs at the highest UHBR speeds are harder to find than long HDMI cables.
Head-to-head: the differences that matter
| Factor | HDMI 2.1 | DisplayPort 1.4 | DisplayPort 2.1 (UHBR20) |
|---|---|---|---|
| Maximum bandwidth | 48Gbps | 32.4Gbps | 80Gbps |
| Headline modes | 4K at 120Hz, 8K at 60Hz with DSC | 4K at 120Hz, 4K at 240Hz with DSC | 4K at 240Hz uncompressed, 16K at 60Hz with DSC |
| Adaptive sync | HDMI VRR in the specification | Native Adaptive Sync, FreeSync and G-Sync | Native Adaptive Sync, FreeSync and G-Sync |
| Daisy-chaining | No | Yes, via MST | Yes, via MST |
| Audio return | Yes, eARC | No return channel | No return channel |
| Typical displays | TVs, consoles, monitors | PC monitors | High-refresh PC monitors |
| Connector locking | Friction fit | Optional latching | Optional latching |
The pattern to notice is that the two standards win in different rooms. HDMI’s bandwidth is entirely sufficient for a 4K TV at 120Hz and it is the only option consoles offer. DisplayPort’s advantage compounds on a desk: MST removes extra cables from a triple-monitor setup, adaptive sync is guaranteed rather than model-dependent, and UHBR20 headroom means a cable bought today is not the bottleneck when the next monitor arrives.
The five products compared
Zeskit Maya 8K Ultra High Speed HDMI Cable (5 ft)
The Maya is the HDMI pick for a single, no-compromise link between a PC or console and a 4K 120Hz display. It is certified under the Ultra High Speed HDMI program, which means the cable carries the certification hologram and can be verified with the HDMI Cable Certification app. Zeskit lists compatibility with HDMI 2.1b features including eARC, VRR, ALLM and Dynamic HDR, and the braided jacket suits cables that get plugged and unplugged often.
Specs:
- Standard: Ultra High Speed HDMI, certified
- Bandwidth: 48Gbps
- Supported modes: 4K at 120Hz, 8K at 60Hz, up to 10K with DSC
- Features: eARC, VRR, ALLM, QFT, QMS, Dynamic HDR, HDCP 2.2 and 2.3
- Length: 5 ft (other lengths from 1.5 ft to 23 ft)
- Construction: braided jacket, Category 3 connector
- Tier: mid-range
Cable Matters 48Gbps 8K HDMI Cable 3-Pack (6.6 ft)
When a desk or entertainment rack needs several HDMI runs at once, this three-pack of individually tested 48Gbps cables is the efficient way to wire it. Each cable is Ultra High Speed HDMI Certified, supports HDR and the HDMI Ethernet Channel, and the three colors make it easy to trace which cable feeds which device. At 6.6 ft per cable, the length suits typical monitor, console and streaming-box spacing.
Specs:
- Standard: Ultra High Speed HDMI, certified
- Bandwidth: 48Gbps per cable
- Supported modes: 8K at 60Hz, 4K at 240Hz
- Features: HDR, ARC, HDMI Ethernet Channel, HDCP 2.2
- Length: 6.6 ft each (3.3 ft and 9.8 ft also offered)
- Pack contents: 3 cables in 3 colors, model 300029
- Tier: budget
Cable Matters VESA Certified DisplayPort 1.4 Cable (6 ft)
This is the straightforward DisplayPort recommendation for the majority of gaming monitors. VESA certification confirms the cable meets the DisplayPort 1.4 specification at full HBR3 bandwidth, and Cable Matters rates it for 8K at 60Hz and 4K at 240Hz with DSC, plus FreeSync and G-Sync support for adaptive-sync monitors. The braided jacket and latching connectors fit the set-and-forget role of a primary monitor cable.
Specs:
- Standard: DisplayPort 1.4, VESA Certified
- Bandwidth: 32.4Gbps (HBR3)
- Supported modes: 8K at 60Hz, 4K at 240Hz with DSC, 4K at 144Hz
- Features: FreeSync, G-Sync, HDR, HDCP
- Length: 6 ft
- Construction: braided jacket, latching connectors
- Tier: budget
IVANKY 8K DisplayPort Cable 1.4 (6.6 ft)
IVANKY’s cable matches the same DisplayPort 1.4 specification with a slightly longer 6.6 ft run and a nylon braided sleeve aimed at desks where the cable bends around monitor arms. It is VESA Certified, carries the full 32.4Gbps HBR3 signal, and supports HDR with HDCP 2.2. Backward compatibility with DisplayPort 1.2 means it also serves older monitors and graphics cards without issue.
Specs:
- Standard: DisplayPort 1.4, VESA Certified
- Bandwidth: 32.4Gbps (HBR3)
- Supported modes: 8K at 60Hz, 4K at 144Hz, 2K at 240Hz
- Features: HDR, HDCP 2.2, FreeSync and G-Sync support
- Length: 6.6 ft
- Construction: nylon braided jacket, model VBC31
- Tier: budget
Silkland 80Gbps DisplayPort 2.1 Cable DP80 (6.6 ft)
For UHBR20 hardware such as the newest flagship graphics cards and 4K 240Hz OLED monitors, this Silkland cable is the forward-looking pick. It is VESA Certified as a DP80 cable at the full 80Gbps, supports uncompressed 4K at 240Hz and 8K at 60Hz, and reaches 16K at 60Hz with DSC enabled. It remains backward compatible with DisplayPort 1.4 equipment, so it can be bought ahead of a monitor upgrade and used immediately.
Specs:
- Standard: DisplayPort 2.1 DP80, VESA Certified
- Bandwidth: 80Gbps (UHBR20)
- Supported modes: 4K at 240Hz and 8K at 60Hz uncompressed, 16K at 60Hz with DSC
- Features: Dynamic HDR10+, HDCP 2.3, DSC 1.2a, FEC, VRR
- Length: 6.6 ft (2 m), model S1334
- Audio: uncompressed 7.1, 5.1 and 2.0 pass-through
- Tier: premium
How to choose between HDMI and DisplayPort
Start with the display, not the cable. If the screen is a television, the decision is already made: use a certified Ultra High Speed HDMI cable and enable the TV’s enhanced or game mode input setting. If the screen is a computer monitor, check which input unlocks its full specification. Some monitors reserve their highest refresh rate or full-bandwidth mode for the DisplayPort input, and a few limit the HDMI port to an older standard. The manual’s specification table settles this in one line.
Next, match the cable tier to the signal. A 1440p 165Hz or 4K 120Hz gaming monitor is served completely by DisplayPort 1.4 or HDMI 2.1, so certification matters more than the newest standard: look for the Ultra High Speed HDMI label or VESA Certified marking rather than a version number printed by an unknown brand. Reserve DisplayPort 2.1 UHBR cables for hardware that can use them, meaning a UHBR-capable graphics card and monitor, since a DP80 cable cannot add bandwidth to 1.4 ports.
Finally, count your displays and measure your runs. Two or three monitors on one graphics card output points to DisplayPort and MST. A long run across a room points to HDMI, where longer certified copper cables and fiber-optic options are easier to source. And whatever you choose, keep the cable as short as the layout allows; high-bandwidth signals are always happier over less copper.
Who should skip a new cable
Skip the purchase if the cable bundled with your monitor already delivers its full rated resolution and refresh rate with adaptive sync working; a replacement adds nothing. Skip DisplayPort 2.1 cables if neither your graphics card nor your monitor has UHBR ports, because the link will simply run at DisplayPort 1.4 speeds. Skip HDMI entirely for a multi-monitor desk build, where DisplayPort’s daisy-chaining is the point. And skip ultra-long passive copper cables of either type for 4K high-refresh signals; that job belongs to fiber-optic cables, which are a different product category.
FAQ
Is DisplayPort better than HDMI for gaming on a PC?
For a gaming monitor, usually yes. DisplayPort offers native adaptive sync, daisy-chaining and, in its 2.1 UHBR20 form, far more bandwidth than HDMI 2.1. HDMI 2.1 closes most of the gap for a single 4K 120Hz display and is the only choice for TVs and consoles, so the better connector depends on the screen at the other end.
Can a cable limit my monitor’s refresh rate?
Yes. The link negotiates the best mode that the graphics card, the cable and the monitor all support. An older High Speed HDMI cable or an uncertified DisplayPort cable can cap a 4K 144Hz monitor at a lower refresh rate or disable adaptive sync. Matching the cable standard to the monitor’s specification, HDMI 2.1 or DisplayPort 1.4 and above, removes the cable as the bottleneck.
Does DisplayPort carry audio like HDMI?
Yes, DisplayPort carries multichannel audio alongside video, and monitors with speakers or a headphone jack can use it. What DisplayPort lacks is an audio return channel, so it cannot send sound from a TV back to a soundbar the way HDMI eARC does. For PC speakers and headsets connected to the computer itself, this difference rarely matters.
Are HDMI and DisplayPort cables interchangeable with adapters?
Passive adapters between the two exist, but they convert the signal in one direction only and inherit the limits of the weaker standard, so features such as high refresh rates, adaptive sync and MST may not survive the conversion. For a permanent setup, a native cable in the correct standard is the reliable choice; keep adapters for temporary connections.
Conclusion
HDMI and DisplayPort are both mature, and the right choice is the one your display was designed around. Choose DisplayPort for a PC monitor, especially for high refresh rates, multiple displays or UHBR20 hardware, and choose HDMI for TVs, consoles and anything involving a soundbar. Within either standard, buy the certification rather than the marketing: an Ultra High Speed HDMI label or a VESA Certified marking is the guarantee that the cable delivers the bandwidth on the box. The five cables above cover both standards at sensible tiers, from a value three-pack of HDMI cables to a future-proof DP80 link.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!