Key takeaways
- Learn how to choose a network switch for home and office: port counts, unmanaged vs smart managed, PoE budgets and 2.5G, with five verified picks.
Most home and small-office routers offer only four LAN ports, and those fill up fast once a desktop PC, a printer, a NAS, a smart TV and a game console all want a wired connection. A network switch solves that problem simply: plug one cable from the router into the switch, and it turns that single port into several. Unlike a router, a switch does not assign IP addresses or manage your internet connection. It simply forwards traffic between devices on your local network at full wire speed.
Choosing one comes down to five questions. How many ports do you need, and at what speed? Do you want plug-and-play simplicity or a settings page with VLANs and traffic priority? Should some ports also deliver power to cameras or access points? Is gigabit still fast enough, or has your hardware moved to 2.5G? And is the housing built to run silently around the clock? This guide works through each question, then presents five verified switches covering the main combinations.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
A network switch adds wired Ethernet ports where your router runs out. For most homes and small offices, a basic five-port gigabit unmanaged switch is enough. Step up to a smart managed model for VLANs and traffic priority, a PoE model to power cameras and access points, or a 2.5G model when your NAS, PC and internet plan already exceed gigabit speeds.
How to choose a network switch
Work through these five points in order and the right category usually becomes obvious.
Port count and speed
Start by counting every device you want wired today, then add likely future purchases. One port is consumed by the uplink cable to your router, so a five-port switch leaves four ports for devices. On speed, gigabit (1000 Mbps per port) is the sensible baseline: it matches most broadband plans, NAS drives and PCs. Each port negotiates its own speed, so an older 100 Mbps device never slows the others down.
Unmanaged vs smart managed
An unmanaged switch has no settings at all: connect the cables and it works, which is exactly what most homes need. A smart managed switch, sometimes called easy smart or web-managed, adds a browser-based settings page. From there you can split the switch into virtual networks (VLANs) to keep guest or smart-home devices apart from your main computers, give some ports traffic priority (QoS), test a suspect cable, and enable loop prevention so a doubled cable cannot flood the network. Those tools suit a small office, but they are optional extras, not a requirement.
PoE budget
Power over Ethernet (PoE) sends power down the same cable as the data, so a security camera, wireless access point or desk phone needs only one cable run. Two numbers matter. The per-port maximum, 30 watts on PoE+ (802.3at) ports, tells you the most a single device can draw. The total PoE budget, 65 watts on the TP-Link pick below, is the pool shared by every powered device at once. Add up your devices first: four cameras drawing 12 watts each fit a 65-watt budget, but hungry devices can exhaust a small budget quickly.
2.5G uplinks
Multi-gigabit switches with 2.5G ports move two and a half times the data of gigabit, over the Cat5e cabling already in most walls, so no rewiring is needed. They make sense when the hardware at both ends supports the faster speed: a NAS with a 2.5G port, a PC with a 2.5G adapter, or a broadband plan and router that exceed gigabit. Gigabit devices still work on a 2.5G switch, simply running at gigabit while faster links use the extra headroom. If everything you own is gigabit today, standard gigabit remains the rational buy.
Metal vs plastic housing
A switch runs around the clock, often tucked into a warm closet or behind a desk, so the enclosure matters. Metal housings spread heat better than plastic and feel far sturdier, and on the models below they are paired with shielded ports and a fanless design, so the switch stays completely silent. Fanless matters in a bedroom or quiet office, where a tiny cooling fan would be audible. Models that can also be wall mounted sit neatly next to a router or inside a network cabinet.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305)
The NETGEAR GS305 is the straightforward answer for a home or small office that simply needs more wired ports. It is unmanaged, so setup is nothing more than connecting the power supply and the cables. All five ports run at gigabit speed, and the current GS305v3 revision sits in a metal, fanless housing that can stand on a desk or mount on a wall, running silently either way. You install it once and forget it exists.
| Spec | Detail |
|---|---|
| Brand | NETGEAR |
| Model | GS305 |
| ASIN | B07S98YLHM |
| Key specs | 5 gigabit ports; unmanaged plug-and-play; metal fanless housing; silent operation; desktop or wall mount |
TP-Link TL-SG105 5 Port Gigabit Unmanaged Ethernet Switch
The TP-Link TL-SG105 covers the same brief as the GS305 with a few quiet extras. Its five ports are shielded and support auto-negotiation and Auto-MDI/MDIX, so any standard cable works in any port. Despite being unmanaged, it includes traffic features more often found on managed gear: 802.1p/DSCP quality of service prioritizes time-sensitive traffic, and IGMP snooping keeps multicast streams such as IPTV from flooding every port. The fanless metal design keeps it silent on a desk. These traffic features make it the slightly smarter default of the two basic picks.
| Spec | Detail |
|---|---|
| Brand | TP-Link |
| Model | TL-SG105 |
| ASIN | B00A128S24 |
| Key specs | 5x 10/100/1000Mbps ports; Auto-MDI/MDIX; fanless metal; shielded ports; 802.1p/DSCP QoS; IGMP snooping |
NETGEAR 5-Port Gigabit Ethernet Easy Smart Managed Switch (GS305E)
The NETGEAR GS305E is the pick for anyone who wants a measure of control without enterprise complexity. NETGEAR calls the category Easy Smart Managed: through a simple interface you can create VLANs to separate traffic, apply QoS priority, run a cable health check on a suspect run, and enable loop prevention. Those are exactly the tools a small office needs when a guest network, smart-home devices and the work computers should not all share one flat network. The management features can simply be left alone until needed.
| Spec | Detail |
|---|---|
| Brand | NETGEAR |
| Model | GS305E |
| ASIN | B07PJ7XZ7X |
| Key specs | 5 gigabit ports; VLAN, QoS, cable health check and loop prevention; desktop or wall mount |
TP-Link TL-SG1005P 5 Port Gigabit PoE Switch
The TP-Link TL-SG1005P is built for networks that include devices needing power over the cable. Four of its five gigabit ports are PoE+ (802.3af/at), each able to supply up to 30 watts, with a 65-watt total budget on the current listing shared across all powered devices. That covers a typical mix of security cameras and a wireless access point. The fifth port is a standard non-PoE gigabit port, handy for the uplink to your router. It also carries QoS and IGMP snooping in a fanless metal case with shielded ports. Older hardware revisions carried a smaller budget, so plan around the current listing’s 65-watt figure.
| Spec | Detail |
|---|---|
| Brand | TP-Link |
| Model | TL-SG1005P |
| ASIN | B076HZFY3F |
| Key specs | 5 gigabit ports; 4 PoE+ ports at 30W per port, 65W total budget; 1 non-PoE port; fanless metal case; QoS and IGMP snooping |
TP-Link TL-SG105S-M2 5-Port Multi-Gigabit 2.5G Ethernet Switch
The TP-Link TL-SG105S-M2 is the future-proofing pick. All five of its ports run at 2.5G, auto-negotiating 100 Mbps, gigabit or 2.5G depending on the device attached, and the switch offers 25 Gbps of total switching capacity. Because 2.5G runs over ordinary Cat5e cabling, most homes can adopt it without touching the wiring in the walls. It remains unmanaged and plug-and-play, with silent fanless operation and desktop or wall mounting. It earns its place when a NAS, modern PC or multi-gig connection waits at the other end of the cable.
| Spec | Detail |
|---|---|
| Brand | TP-Link |
| Model | TL-SG105S-M2 |
| ASIN | B0CMXXPTVH |
| Key specs | 5x 2.5G ports (100M/1G/2.5G); 25 Gbps switching capacity; Cat5e cabling; unmanaged; fanless; desktop or wall mount |
Who should skip
Skip this category entirely if your router’s built-in ports already cover every wired device you own, or if everything in the house connects over Wi-Fi and you have no plans to change that. Also skip these compact models if you need rack mounting, SFP uplinks, full Layer 3 management or dozens of ports. Finally, a switch cannot fix a slow internet plan or an overloaded router; it only moves traffic inside your local network, so spend the money there instead if that is where the bottleneck sits.
FAQ
Will a network switch slow down my internet connection?
No. A gigabit switch moves local traffic at wire speed and adds no meaningful delay. Devices connected through it reach the internet at the same speed they would get plugged directly into the router. If a device negotiates only 100 Mbps, check the cable first: damaged or very old cables are the usual cause, not the switch.
What is the difference between a switch and a router?
A router connects your local network to the internet, assigns IP addresses and usually provides Wi-Fi and a firewall. A switch only adds wired ports inside that network and forwards traffic between local devices. The router stays in charge; the switch quietly extends the network. You cannot replace a router with a switch alone.
Can I connect one switch to another switch?
Yes. Switches can be chained by running a cable from a port on the first switch to a port on the second, a practical way to add ports in another room. Each link carries the combined traffic of everything downstream, so keep high-demand devices such as a NAS on the first switch, and never run two cables between the same pair of switches, which creates a loop.
Do I need PoE if I only connect computers and a printer?
No. Computers, printers, TVs and consoles power themselves from the wall, so a plain non-PoE switch serves them perfectly well. PoE only matters for devices designed to draw power from the cable, mainly security cameras, ceiling access points and VoIP phones. Buying PoE before you own such a device adds cost without benefit.
Final verdict
For most homes and small offices, the decision is simpler than the spec sheets suggest. If you just need ports, the NETGEAR GS305 or TP-Link TL-SG105 will serve quietly for years, with the TP-Link’s traffic features giving it a slight edge. The GS305E is the one to buy when you want VLANs and basic management within reach. The TL-SG1005P is the clear choice when cameras or access points need power over the cable, planned around its 65-watt budget. The TL-SG105S-M2 looks forward, ready for 2.5G hardware the day it arrives.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!