Updated Nov 19, 2026· 10 min read

Key takeaways

  • SFX vs ATX power supplies compared on dimensions, wattage, cable length, fan noise and GPU connectors, with five modular picks for ITX and ATX builds.

Table of Contents

  • The short answer
  • SFX explained: power in a 63.5 mm tall box
  • ATX explained: the standard desktop format
  • Head-to-head: the differences that matter
  • The five products compared
  • Which one should you buy?
  • FAQ
  • Conclusion
  • Product and ASIN Reference

Every power supply buying decision starts with a physical question: what fits in the case? SFX and ATX are the two form factors that dominate desktop PC building, and they differ by far more than a few centimeters of sheet metal. The format you pick decides which cases you can use, how long your cables are, how big the cooling fan can be, and how much headroom you have for future graphics cards.

This guide compares SFX and ATX power supplies on the specs that actually separate them: dimensions, wattage range, cable design, fan size and noise behavior, GPU connectors and warranty support. It then lines up five current fully modular products, two SFX units and three ATX units, so you can see what each format offers at mid-range and premium tiers.

As an Amazon Associate, we earn from qualifying purchases.

The short answer

Choose SFX if your case is a small-form-factor or mini-ITX design that physically cannot accept an ATX unit, or if you want the smallest possible PSU footprint in a compact build. Choose ATX if your case has a standard PSU bay, which covers the overwhelming majority of mid-tower and full-tower builds: ATX units give you a wider wattage range, longer cables, larger and slower-spinning fans, and more choice at every tier. Neither format is electrically superior by definition; a well-built SFX unit and a well-built ATX unit of the same wattage and efficiency class deliver power the same way. The difference is packaging, and packaging is dictated by your case.

SFX explained: power in a 63.5 mm tall box

SFX is the small-form-factor PSU standard. An SFX unit measures 125 mm wide, 100 mm deep and 63.5 mm tall, a fraction of the volume of an ATX supply. A close relative, SFX-L, keeps the same width and height but stretches the depth to 130 mm so it can fit a larger 120 mm fan. SFX was created for slim and mini-ITX cases where a full-size ATX bay simply does not exist, and modern SFX units are far from the low-wattage curiosities the format started as: current models reach 850 W and beyond, carry 80 Plus Gold and Platinum efficiency certifications, and ship with native connectors for the latest graphics cards.

Because the enclosure is small, everything inside is compressed. The cooling fan is typically 92 mm, cables are short by design because they only need to cross a tiny case, and the internal layout leaves less room for heatsinks and large capacitors. Good SFX units compensate with high efficiency, since less wasted energy means less heat to remove, and with fan curves that keep the fan off entirely at low loads. Most SFX supplies also include an SFX-to-ATX adapter bracket in the box, so the same unit can be mounted in a standard ATX bay if you move to a bigger case later.

ATX explained: the standard desktop format

ATX is the default desktop PSU form factor, defined at 150 mm wide and 86 mm tall, with depth left to the manufacturer. Most ATX units are 140 to 160 mm deep, and high-wattage models can run longer. That extra volume buys three things: room for a 120 mm, 135 mm or 140 mm cooling fan that moves the same air at lower, quieter speeds; space for larger heatsinks and capacitor banks; and a product range that spans from basic budget units to flagship supplies well past 1,000 W.

ATX is also where new standards land first and in the greatest variety. The current generation of ATX 3.0 and ATX 3.1 supplies is built to absorb the brief power excursions of modern graphics cards and provides a native 12V-2×6 (formerly 12VHPWR) connector that feeds a high-end GPU over a single cable instead of a bundle of 8-pin adapters. Cable sets are longer than SFX sets, sized for routing through mid-towers and full-towers, and replacement or custom sleeved cables are widely available because the installed base is enormous.

Head-to-head: the differences that matter

Size and case fit. This is the deciding factor and it is not negotiable. An SFX-only case cannot take an ATX supply at any wattage, and while an ATX case can accept an SFX unit with the adapter bracket, the SFX unit’s short cables may not reach the motherboard and GPU in a large chassis. Start with the case’s PSU specification sheet and let it make this decision for you.

Wattage range. ATX supplies cover the full market, from entry-level units under 500 W to flagships above 1,600 W. SFX tops out at lower absolute numbers, but the ceiling has risen to the point where 750 W and 850 W SFX models can run high-end single-GPU systems. If your build needs more than roughly 1,000 W, ATX is the only option.

Cables. SFX cable sets are short, often around 300 mm on the motherboard lead, which is perfect inside a mini-ITX case and a genuine problem in a tower. ATX sets are longer and easier to route in big cases, and fully modular designs dominate both formats at mid-range tiers and above, so you only install the cables your build uses.

Fan size and noise. An ATX unit’s 120 to 140 mm fan spins slower for the same airflow as an SFX unit’s 92 mm fan, so at equal loads an ATX supply usually has the acoustic advantage on paper. In practice, efficiency matters as much as fan diameter: a Platinum-rated SFX unit wastes less energy as heat, and zero-RPM fan modes on both formats keep the fan stopped during desktop work and light gaming.

GPU connectors and standards. Both formats now offer ATX 3.x models with native 12V-2×6 connectors, but the selection is far deeper on the ATX side. If you are building around a current flagship graphics card, check that the specific model, in either format, lists ATX 3.0 or 3.1 compliance and the connector wattage your card requires.

Efficiency and price tier. Comparable wattage and certification levels exist in both formats, but SFX carries a size premium: packing 850 W into a smaller box costs more to engineer, so an SFX unit typically sits a tier above an ATX unit of similar wattage and efficiency. Budget accordingly if your case forces the small format.

The five products compared

Corsair SF750 (SFX)

The SF750 is the reference point for high-end SFX building: 750 W of 80 Plus Platinum power in the standard SFX footprint, with fully modular, individually sleeved cables that are easy to route in a cramped case. Its 92 mm PWM fan stays off at low and medium loads under Corsair’s Zero RPM mode, and the unit is built around 105 °C-rated Japanese capacitors. One generational caveat: this is the original SF750 design, which predates the native 12V-2×6 connector, so current flagship GPUs run from its PCIe 6+2-pin cables and the adapter supplied with the card. An SFX-to-ATX bracket is included, and Corsair backs it with a seven-year warranty. It sits in the premium tier.

Specs

  • Form factor: SFX, 125 x 100 x 63.5 mm
  • Wattage: 750 W
  • Efficiency: 80 Plus Platinum
  • Modularity: Fully modular, individually sleeved cables
  • Fan: 92 mm PWM with Zero RPM mode
  • GPU power: PCIe 6+2-pin cables (no native 12V-2×6)
  • Capacitors: 105 °C-rated Japanese electrolytics
  • Extras: SFX-to-ATX adapter bracket included
  • Warranty: 7 years

Lian Li SP850 (SFX)

Check price on Amazon

The SP850 pushes SFX output to 850 W with an 80 Plus Gold rating, giving compact builds headroom for power-hungry graphics cards without leaving the small format. It is fully modular, housed in a steel and brushed aluminum enclosure, and includes a 12VHPWR cable for current-generation GPUs alongside conventional PCIe 6+2-pin leads. Combined +12 V output is rated at 840 W, active PFC is standard, and the 92 mm fan uses temperature-based start/stop control so it can stay silent at light loads. Lian Li publishes a five-year warranty for the unit. It sits in the mid-range tier and is also offered in a white finish for themed builds.

Specs

  • Form factor: SFX, 125 x 100 x 63.5 mm
  • Wattage: 850 W (840 W combined +12 V)
  • Efficiency: 80 Plus Gold
  • Modularity: Fully modular
  • Fan: 92 mm with temperature-based start/stop
  • GPU power: 12VHPWR cable plus PCIe 6+2-pin cables
  • Housing: Steel and brushed aluminum
  • Warranty: 5 years

Corsair RM850x, 2024 revision (ATX)

Check price on Amazon

The refreshed RM850x is Corsair’s mainstream ATX workhorse: 850 W, Cybenetics Gold efficiency, and full ATX 3.1 compliance with a native 12V-2×6 connector for the latest graphics cards. A 140 mm fluid-dynamic-bearing fan and 105 °C-rated Japanese capacitors handle cooling and longevity, and the fully modular embossed cables are flexible enough to route cleanly in mid-towers. At 160 mm deep it is a standard-length ATX unit that fits the vast majority of cases, and Corsair covers it with a ten-year warranty. It sits in the mid-range tier and is the default recommendation shape for a full-size gaming build.

Specs

  • Form factor: ATX, 150 x 86 x 160 mm
  • Wattage: 850 W
  • Efficiency: Cybenetics Gold
  • Standard: ATX 3.1, PCIe 5.1 ready
  • GPU power: Native 12V-2×6 connector
  • Modularity: Fully modular
  • Fan: 140 mm fluid dynamic bearing
  • Capacitors: 100 percent Japanese, 105 °C-rated
  • Warranty: 10 years

MSI MPG A850G PCIE5 (ATX)

Check price on Amazon

MSI’s MPG A850G PCIE5 matches the RM850x on headline numbers, 850 W and 80 Plus Gold, in a slightly shorter 150 mm deep chassis that helps in cases with tight PSU shrouds. It is ATX 3.1 and PCIe 5.1 ready in its current revision, with a native 12V-2×6 cable rated for up to 600 W of GPU power and specified excursion handling of twice the total rated power. The build uses 100 percent Japanese 105 °C capacitors, a 135 mm fan with a zero-RPM mode, and fully modular flat cables. MSI backs the unit with a ten-year warranty. It sits in the mid-range tier.

Specs

  • Form factor: ATX, 150 x 86 x 150 mm
  • Wattage: 850 W
  • Efficiency: 80 Plus Gold
  • Standard: ATX 3.1, PCIe 5.1 ready
  • GPU power: Native 12V-2×6 cable, up to 600 W
  • Modularity: Fully modular, flat cables
  • Fan: 135 mm with 0 RPM mode
  • Capacitors: 100 percent Japanese, 105 °C-rated
  • Warranty: 10 years

be quiet! Pure Power 12 M 850W (ATX)

The Pure Power 12 M is the acoustics-first entry in this ATX group. be quiet! specifies the unit to its own ATX 3.0 standard with a native 12VHPWR connector rated for high-end GPUs, 80 Plus Gold efficiency, and a temperature-controlled 120 mm fan from the company’s own low-noise lineup. It is fully modular, uses a single strong +12 V rail design, and carries a ten-year warranty. At 160 mm deep it needs the same standard bay as the Corsair above. Builders who keep the PC in a bedroom or studio and value a quiet fan curve over the newest 3.1 label are its natural audience. It sits in the mid-range tier.

Specs

  • Form factor: ATX, 150 x 86 x 160 mm
  • Wattage: 850 W
  • Efficiency: 80 Plus Gold
  • Standard: ATX 3.0 (manufacturer specification)
  • GPU power: Native 12VHPWR connector
  • Modularity: Fully modular
  • Fan: 120 mm, temperature-controlled
  • Warranty: 10 years

Which one should you buy?

If your case only accepts SFX, the decision is already made: pick the SF750 for a premium, efficiency-led build up to 750 W, or the SP850 when your graphics card pushes you to 850 W. If your case takes ATX, all three ATX units here cover a modern 850 W gaming build; the RM850x is the well-rounded default, the MPG A850G PCIE5 wins on chassis depth for cramped shrouds, and the Pure Power 12 M is the pick when fan noise is the priority. Whichever format you land on, size the wattage to your GPU manufacturer’s recommendation, confirm the case’s PSU depth limit, and never mix modular cables between brands or models, because the PSU-side pinout is not standardized.

FAQ

Can I put an SFX power supply in an ATX case?

Yes, with the SFX-to-ATX adapter bracket that most SFX units include in the box. The real limitation is cable length: SFX cable sets are designed for mini-ITX cases, so in a full tower the motherboard and GPU leads may not reach without extensions.

Can I put an ATX power supply in an SFX case?

No. An ATX unit is physically larger in every dimension, 150 mm wide and 86 mm tall against the SFX unit’s 125 mm by 63.5 mm, and it will not fit an SFX-only mounting bay. If a case lists SFX or SFX-L support only, the format decision is made for you.

Is SFX less reliable or lower quality than ATX?

Not inherently. Quality is set by the platform, components and certification, not the outline. High-end SFX units carry the same 80 Plus Platinum ratings, Japanese capacitors and long warranties as respected ATX models; they simply concentrate the engineering into a smaller enclosure, which is why they tend to sit in higher price tiers at a given wattage.

How much wattage do I actually need?

Follow the GPU manufacturer’s recommended PSU wattage for your graphics card, then add headroom if you plan upgrades. Most single-GPU gaming builds land between 650 W and 850 W. Both formats cover that range; builds beyond roughly 1,000 W, multi-GPU experiments aside, are ATX-only territory.

Conclusion

SFX versus ATX is a fitment decision first and a features decision second. The case chooses the format: SFX for the compact builds that demand it, with the SF750 and SP850 proving that small no longer means weak, and ATX for everything else, where the RM850x, MPG A850G PCIE5 and Pure Power 12 M 850W show how much fan size, cable length and warranty you get when space is not a constraint. Match the wattage to your graphics card, insist on full modularity and a current ATX 3.x standard for a new GPU build, and either format will power a system for years.

Check price on Amazon

Check price on Amazon

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
SFX vs ATX Power Supply: Which Size Fits…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.