Updated Nov 20, 2026· 8 min read

Key takeaways

  • Five PEI magnetic build plates compared for Bambu, Ender, and CR-10 printers, with exact sizes, model fit lists, and the checks to run before ordering.
⭐ Key Takeaways
Quick answer: Our top pick is BIQU CryoGrip Pro Glacier Panda Build Plate, 257 × 257 mm, with Creality Official PEI Plate Kit, 235 × 235 mm as a strong alternative.

The build plate decides how the first layer of every print behaves. A PEI-coated spring steel sheet sits on a magnetic base, holds the part firmly while the bed is hot, and then flexes so the finished print pops off without prying or scraping. For owners still printing on glass or a worn stock surface, it is one of the simplest quality-of-life upgrades available for an FDM machine.

This guide compares five magnetic PEI plates across the three most common bed sizes: 257 × 257 mm for Bambu Lab machines, 235 × 235 mm for the Ender class, and 310 × 310 mm for the CR-10 family. Fit is everything with these sheets, so every pick below lists the printer models its maker names. One pick is a sheet sold without a magnetic sticker, and that limitation is flagged clearly rather than buried.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

A magnetic PEI spring steel plate is the simplest bed upgrade for most FDM printers: prints stick while hot, release with a flex when cool, and the sheet lifts off its magnetic base. Match the plate size to your bed first, then check the fit list for your exact printer model before ordering.

BIQU CryoGrip Pro Glacier Panda Build Plate, 257 × 257 mm

BIQU CryoGrip Pro Glacier Panda Build Plate, 257 × 257 mm

BIQU CryoGrip Pro Glacier Panda Build Plate, 257 × 257 mm

Check price on Amazon

Brand Product ASIN Key specs
BIQU CryoGrip Pro Glacier Panda Build Plate B0DH2H4S41 257 × 257 mm; double-sided fine-textured spring steel sheet; removable surface platform; fits Bambu Lab P1P, P1S, P2S, X1C, X1E and A1

The CryoGrip Pro Glacier is the pick for Bambu Lab owners. Its fine-textured, double-sided spring steel sheet is part of BIQU’s CryoGrip line, which is built around strong adhesion at lower bed temperatures, and the Glacier variant is the broad-material version of that line. Both faces are usable, so a worn or damaged side does not end the plate’s working life.

The maker fit list covers the P1P, P1S, P2S, X1C, X1E and A1. One caution belongs here: Bambu Lab A1 printers sold before January 30, 2024 are under a CPSC recall for the heatbed cable and should not be used until remedied as Bambu directs. The plate itself is not recalled; this is a printer-level warning for A1 owners. Also select the plate type your slicer expects when running a third-party plate, since automatic plate detection may not identify it.

Creality Official PEI Plate Kit, 235 × 235 mm

Creality Official PEI Plate Kit, 235 × 235 mm

Creality Official PEI Plate Kit, 235 × 235 mm

Check price on Amazon

Brand Product ASIN Key specs
Creality Official PEI Plate Kit, model CR-PEI0105 B0BRQ7LRNC 235 × 235 mm; double-sided golden PEI spring steel sheet with frosted textured surface; magnetic sticker with adhesive included; fits the Ender 3, Ender 5 and CR-20 families

This is the most complete kit in the guide for the huge Ender installed base. The golden PEI sheet has a frosted, textured finish on both sides, and the box includes the magnetic sticker with adhesive, so a printer still running a glass bed can convert to a magnetic setup in one purchase rather than sourcing the base layer separately.

The listing compatibility list runs long: Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 5, Ender 5 Pro, CR-20, CR-20 Pro, and any other printer with a 235 × 235 mm bed. The plate is sold through third-party Creality storefronts on Amazon, so treat it as the official plate design, model CR-PEI0105, without assuming Creality-direct fulfillment or support channels.

Comgrow PEI Sheet Magnetic Flexible Heated Bed, 235 × 235 mm

Comgrow PEI Sheet Magnetic Flexible Heated Bed, 235 × 235 mm

Comgrow PEI Sheet Magnetic Flexible Heated Bed, 235 × 235 mm

Check price on Amazon

Brand Product ASIN Key specs
Comgrow PEI Sheet Magnetic Flexible Heated Bed B07XBM24HN 235 × 235 mm PEI spring steel sheet; magnetic flexible bed surface; fits Ender 3 range, ELEGOO Neptune 3 Pro and 4, Anycubic Kobra, Flashforge Adventurer 5M

Comgrow’s sheet covers a wider spread of brands than most 235 mm plates. Alongside the Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo and Ender 3 Neo, the listing title names the ELEGOO Neptune 3 Pro and Neptune 4, the Anycubic Kobra and the Flashforge Adventurer 5M, which makes it a useful default for mixed-brand benches and second printers.

The format is the familiar one: a PEI-coated spring steel sheet that sits on the printer’s magnetic base, grips the first layer while hot, and releases the part with a gentle bend once the bed cools. Print the brand as Comgrow, as the listing title does, and confirm your exact model against the fit list, because several of the named machines also ship in larger sizes that this 235 mm sheet will not cover.

Jusnboir PEI Spring Steel Sheet, 310 × 310 mm

Jusnboir PEI Spring Steel Sheet, 310 × 310 mm

Jusnboir PEI Spring Steel Sheet, 310 × 310 mm

Check price on Amazon

Brand Product ASIN Key specs
Jusnboir PEI Spring Steel Sheet B09KRL3BQ1 310 × 310 mm; double-sided PEI spring steel sheet; textured frosted surface; magnetic flexible heated bed plate; fits Creality CR-10, CR-10S, CR-10S Pro, CR-10 V2 and CR-10 V3

Large-format printers need large-format plates, and this Jusnboir sheet is the 310 × 310 mm option in the guide. It is a double-sided PEI spring steel sheet with a textured frosted surface, built as a magnetic flexible heated bed plate for the Creality CR-10 line: CR-10, CR-10S, CR-10S Pro, CR-10 V2 and CR-10 V3.

Measure your bed before ordering. A 310 mm plate physically cannot suit a 235 mm machine, and CR-series naming is crowded enough that similar model names hide different bed sizes. If your printer’s build area matches the fit list above, this sheet brings the same flex-to-release routine to a much bigger print surface, and having two usable faces doubles the interval before a replacement is needed.

YOOPAI Double-Sided PEI Sheet, 235 × 235 mm

Brand Product ASIN Key specs
YOOPAI Double-Sided PEI Sheet, model “Double-sided PEI 235” 235 × 235 mm; double-sided gold PEI spring steel sheet; sheet only, no magnetic sticker included; fits Ender 3 V3 SE and KE, K1 and K1C, Ender 3 V3 and more

The YOOPAI sheet suits the newer Creality machines. Its fit list covers the Ender 3 V3 SE, Ender 3 V3 KE, K1, K1C, Ender 3 V3, Ender 3, Ender 3 Pro, Ender 5 S1, Ender 3 S1 Pro and Ender 3 Neo, which makes it a sensible spare or replacement sheet for the current Creality range, in double-sided gold PEI spring steel.

The critical detail is in the listing title: this is the sheet only, without a magnetic sticker. It works on a printer that already has a magnetic base fitted, which the named K1 and Ender 3 V3 machines do, but it will not convert a plain glass-bed printer by itself. Buy it as a fresh surface for an existing magnetic setup, not as a conversion kit.

How to Choose

Start with size, because nothing else matters if the sheet does not match the bed. The three sizes here, 235 × 235 mm, 257 × 257 mm and 310 × 310 mm, cover most consumer FDM printers, but close is not close enough: an oversize sheet overhangs and an undersize sheet wastes build area and can foul clips or screws. Measure the bed itself rather than trusting the printer’s marketing name.

Next, work through the maker’s fit list model by model. Printer families reuse names across generations with different beds and bases, so confirm your exact variant appears. Then check what your printer already has. A machine with a magnetic base needs only the sheet; a glass-bed machine needs a kit that includes the magnetic sticker, or a separate base layer bought alongside.

Finally, consider the surface. Textured and frosted PEI grips well and hides first-layer lines on the bottom face of a print, and a double-sided sheet is worth having because one accident does not end its life. If you run a third-party plate on a printer with automatic plate recognition, select the plate type your slicer expects so temperature and offset settings match the sheet actually fitted.

Who Should Skip

Skip the YOOPAI pick if your printer still has a plain glass bed and no magnetic base. That listing is the sheet only, with no magnetic sticker, so it cannot attach or convert anything by itself; choose the Creality kit instead, which includes the sticker. Skip every pick here if your bed size is not one of the three covered, however close it looks, and measure before assuming a family name guarantees a size.

Owners of a Bambu Lab A1 sold before January 30, 2024 should also pause: that printer is under a CPSC heatbed cable recall and should not be run until remedied as Bambu directs, whatever plate is fitted. And if your current plate is performing well and you print one material on one machine, a spare sheet is a convenience, not a necessity.

FAQ

Do these plates need glue or tape for adhesion?

PEI is used precisely because common filaments grip it while the bed is hot and release as it cools, so extra adhesives are usually unnecessary. Keep the surface clean and free of skin oils, and let the bed cool fully before flexing the sheet to remove a part.

Can I use one of these sheets on any printer of the same bed size?

Size is necessary but not sufficient. The printer also needs a magnetic base for the sheet to hold to, and the maker’s fit list is the authority on which models a plate suits. Check both the dimensions and your exact model name before ordering.

What should A1 owners do about the recall mentioned above?

Bambu Lab A1 printers sold before January 30, 2024 are under CPSC recall 24-264 for the heatbed cable. Follow Bambu’s remedy instructions for the printer itself and do not treat a new build plate as any part of the fix. The plates in this guide are passive sheets and are not recalled.

How long does a PEI sheet last?

It depends on use, materials and how parts are removed. Letting the bed cool and flexing the sheet, rather than prying with a scraper, extends its life, and a double-sided sheet can be flipped when one face wears. Treat the plate as a consumable surface with a long service interval, not a permanent part.

Final Verdict

For Bambu Lab P1 and X1 owners, the BIQU CryoGrip Pro Glacier is the natural pick, with the A1 recall caution noted for early machines. Ender owners converting from glass should take the Creality kit for its included magnetic sticker, while the Comgrow sheet covers the widest mix of 235 mm brands. CR-10 owners get their size from Jusnboir, and YOOPAI is the right spare sheet for newer Creality machines that already have a magnetic base. Match size, check the fit list, and confirm what your printer already has fitted.

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best PEI Magnetic Build Plates for FDM 3D…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.